Bộ điều khiển báo động địa chỉ BUSNET TAKEX BUS-C630-3

- Set the address from 1 to 30 with the switch installed in the terminal device. After that, you can manage and operate individual output, group output from 1 to 6, and memory display only by registering and setting on the controller side. Even if there is an on-site layout change, everything can be changed easily on the controller side, so operation flexibility can be maintained.
Đặc tính kỹ thuật

Part number BUS-C630-3
Power-supply voltage 10.5 to 28 VDC (with polarity)
Current consumption 700mA
Number of terminals that can be connected 30 units
Transmission method Bus net method (time division multiplex transmission method)
Wiring length Maximum length: 1000m
Branch: No restrictions (1000m or less)
Total wiring length: 4000m
(When using φ0.9mm AE wire (OP wire))
Transmission speed About 8-16msec / 1 unit
Communication contents Controller → Terminal: Indicator light control, loop status, warning status
Terminal → Controller : Normal, alarm, tamper, voltage drop, equipment error
Address (1 to 30)
input Warning / release input (a contact / b contact switching type)
output Group alarm output (1 to 6) Loop output, system error output, tamper output
Non-voltage semiconductor contact a contact / b contact batch switching
AC / DC 30V / 0.25A
Indicator (display panel) Address number indicator (1 to 30): green
address warning indicator (1 to 30): Red
Group - up warning indicator (1 to 6): red
alert / cancellation indicator: red / green
Lumpur - flop indicator: Green
System error indicator: Red
Tamper indicator: Red
Power indicator: Green
Memory-backup Yes
Wiring connection Power supply, bus line: M4 self-up terminal
Other than above: M3 self-up terminal
Usable ambient temperature -15°C to + 55°C (no condensation)
Installation location Indoor (wall mounted)
mass 1,400g
appearance Resin (white)