0
NOTIFIER

Đầu dò báo khói địa chỉ gồm đế NOTIFIER FSP-851/B501

Mã hàng: | Đánh giá: | Lượt xem: 1657
Giá bán: Liên hệ
Kho hàng: Hết hàng
Mô tả sản phẩm:
  • - Sleek, low-profile design.
  • - Addressable-analog communication.
  • - Stable communication technique with noise immunity.
  • - Low standby current.
  • - Two-wire SLC connection.
CÁC SHOWROOM CỦA HAVIETPRO
B27 Lô 19 khu đô thị Định Công,phường Định Công,quận Hoàng Mai, Hà Nội Số 61/7 Bình Giã, phường 13, quận Tân Bình, Thành phố Hồ Chí Minh.
YÊN TÂM MUA SẮM TẠI havietpro
Giá cả cạnh tranh, hàng hóa đa dạng
1 đổi 1 trong vòng 03 ngày
Giao hàng miễn phí trong bán kính 20km
Mua hàng online rẻ hơn, thêm quà
Xin quý khách lưu ý:
* Sản phẩm chính hãng,mới 100%.
* Miễn phí giao hàng và bảo hành tại nơi sử dụng trong nội thành Hà Nội, TP HCM. Với các khu vực khác, tùy từng sản phẩm mà chúng tôi có hỗ trợ miễn phí hoặc không.
* Giá bán trên website là giá chưa bao gồm thuế giá trị gia tăng (VAT).
* Thông tin sản phẩm và hình ảnh được cập nhật theo thông tin của nhà sản xuất cung cấp.
Thông tin sản phẩm
Đầu dò báo khói địa chỉ gồm đế NOTIFIER FSP-851/B501

Đầu dò báo khói địa chỉ gồm đế NOTIFIER FSP-851/B501

- Notifier FSP-851 Series intelligent plug-in smoke detectors with integral communication provide features that surpass conventional detectors. Detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector’s address to be set with rotary, decimal address switches, providing exact detector location for selective maintenance when chamber contamination reaches an unacceptable level.

- The FSP-851 photoelectric detector’s unique optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources. Dual electronic thermistors add 135°F (57°C) fixedtemperature thermal sensing on the FSP-851T.

- The FSP851R is a remote test capable detector for use with DNR(A)/DNRW duct detector housings. FSP-851 series detectors are compatible with Notifier Onyx and CLIP series Fire Alarm Control Panels (FACPs).

- Sleek, low-profile design.

- Addressable-analog communication.

- Stable communication technique with noise immunity.

- Low standby current.

- Two-wire SLC connection.

- Compatible with FlashScan® and CLIP protocol systems.

- Rotary, decimal addressing (1-99 on CLIP systems, 1-159 on FlashScan systems).

- Optional remote, single-gang LED accessory.

- Dual LED design provides 360° viewing angle.

- Visible bi-color LEDs blink green every time the detector is addressed, and illuminate steady red on alarm (FlashScan systems only).

- Remote test feature from the panel.

- Walk test with address display (an address on 121 will blink the detector LED: 12 [pause]-1(FlashScan systems only).

- Built-in functional test switch activated by external magnet.

- Built-in tamper-resistant feature.

- Sealed against back pressure.

- Constructed of off-white fire-resistant plastic, designed to commercial standards, and offers an attractive appearance.

- 94-5V plastic flammability rating.

- SEMS screws for wiring of the separate base.

- Optional relay, isolator, and sounder bases.

Thông số kỹ thuật

Đầu dò báo khói địa chỉ gồm đế NOTIFIER FSP-851/B501

- Notifier FSP-851 Series intelligent plug-in smoke detectors with integral communication provide features that surpass conventional detectors. Detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector’s address to be set with rotary, decimal address switches, providing exact detector location for selective maintenance when chamber contamination reaches an unacceptable level.

- The FSP-851 photoelectric detector’s unique optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources. Dual electronic thermistors add 135°F (57°C) fixedtemperature thermal sensing on the FSP-851T.

- The FSP851R is a remote test capable detector for use with DNR(A)/DNRW duct detector housings. FSP-851 series detectors are compatible with Notifier Onyx and CLIP series Fire Alarm Control Panels (FACPs).

- Sleek, low-profile design.

- Addressable-analog communication.

- Stable communication technique with noise immunity.

- Low standby current.

- Two-wire SLC connection.

- Compatible with FlashScan® and CLIP protocol systems.

- Rotary, decimal addressing (1-99 on CLIP systems, 1-159 on FlashScan systems).

- Optional remote, single-gang LED accessory.

- Dual LED design provides 360° viewing angle.

- Visible bi-color LEDs blink green every time the detector is addressed, and illuminate steady red on alarm (FlashScan systems only).

- Remote test feature from the panel.

- Walk test with address display (an address on 121 will blink the detector LED: 12 [pause]-1(FlashScan systems only).

- Built-in functional test switch activated by external magnet.

- Built-in tamper-resistant feature.

- Sealed against back pressure.

- Constructed of off-white fire-resistant plastic, designed to commercial standards, and offers an attractive appearance.

- 94-5V plastic flammability rating.

- SEMS screws for wiring of the separate base.

- Optional relay, isolator, and sounder bases.

Video

Đang cập nhật...

Sản phẩm liên quan
Bình luận
img cmt
x
Tư vấn & bán hàng qua Facebook
Sản phẩm khuyến mãi
Sản phẩm đã xem
Chọn khu vực mua hàng

Hãy chọn tỉnh thành của bạn, bạn có thể thay đổi lại ở đầu trang