Mr.Nguyễn Xuân Hà
Zalo 0969.393.232
Email: xuanha@havietpro.vn
Ms.Bùi Quỳnh Trang
Zalo 0962.726.399
Email: quynhtrang@havietpro.vn
Mr.Đinh Đức Huy
Zalo 0981.642.399
Email:duchuy@havietpro.vn
Mr.Lê Trần Đức Hải
Zalo 0867709588
Email:duchai@havietpro.vn
Ms.Trương Ngân Hà
Zalo 0978.851.059
Email: nganha@havietpro.vn
Ms.Ngô Thị Hà
Zalo 0961794588
Email: ngoha@havietpro.vn
Ms.Lê Hoàng Thảo Vy
Zalo 0961650488
Email: thaovy@havietpro.vn
Mr.Trần Quốc Bình
Zalo 0975.642.399
Email:quocbinh@havietpro.vn
Ms Dương Thị Ngọc Nhi
Zalo 0961591066
Email: ngocnhi@havietpro.vn
Zalo0962726399
Email:quynhtrang@havietpro.vn
Ms.Lê Trần Đức Hải
Email: duchai@havietpro.vn
Email:ngoha@havietpro.vn
Mr.Nguyễn Trung Hà
Zalo 0977.045.517
Email: trungha@havietpro.vn
Mr.Nguyễn Nam Thành
Zalo 0865647988
Email:namthanh@havietpro.vn
Email: info@havietpro.vn
Ms.Nguyễn Tuyết Nhung
Zalo0972697354
Ms.Ngọc Trân
Zalo 0786687714
Mr.Trương Tuấn Anh
Zalo 0975.919.955
Email:tuananh@havietpro.vn
Mr.Tạ Mạnh Hùng
Zalo 0964.365.399
Email:kythuathn.havietpro@gmail.com
Mr.Hoàng Quốc Hưng
Zalo 0961810788
Email:kythuathcm.havietpro@gmail.com
+ Di chuột để phóng to
Module chuông báo NOTIFIER FCM-1
- The FCM-1 Addressable Control Module provides Notifier intelligent fire alarm control panels a circuit for Notification Appliances (horns, strobes, speakers, etc.). Addressability allows the FCM-1 to be activated, either manually or through panel programming, on a select (zone or area of coverage) basis.
- Built-in type identification automatically identifies these devices to the control panel.
- Internal circuitry and relay powered directly by two-wire SLC loop. The FCM-1 module requires power (for horns, strobes, etc.), or audio (for speakers).
- Integral LED “blinks” green each time a communication is received from the control panel and turns on in steady red when activated.
- LED blink may be deselected globally (affects all devices).
- High noise immunity (EMF/RFI).
- The FCM-1(A) may be used to switch 24-volt NAC power, audio (up to 70.7 Vrms).
- Wide viewing angle of LED.
- SEMS screws with clamping plates for wiring ease.
- Direct-dial entry of address 01– 159 for FlashScan loops, 01 – 99 for CLIP mode loops.
Thông số kỹ thuật
- Normal operating voltage: 15 to 32 VDC.
- Maximum current draw: 6.5 mA (LED on).
- Average operating current: 350 A direct poll, 375 A group poll with LED flashing, 485 A Max. (LED flashing, NAC shorted.).
- Maximum NAC Line Loss: 4 VDC.
- External supply voltage (between Terminals T10 and T11): Maximum (NAC): Regulated 24 VDC; Maximum (Speakers): 70.7 V RMS, 50W.
- Drain on external supply: 1.7 mA maximum using 24 VDC supply; 2.2 mA Maximum using 80 VRMS supply.
- Max NAC Current Ratings: For class B wiring system, the current rating is 3A; For class A wiring system, the current rating is 2A.
- Temperature range: 32°F to 120°F (0°C to 49°C).
- Humidity range: 10% to 93% non-condensing.
- Dimensions: 4.5-inch (114.3 mm) high x 4-inch (101.6 mm) wide x 1.25-inch (31.75 mm) deep. Mounts to a 4-inch (101.6 mm) square x 2.125-inch (53.975 mm) deep box.
- Accessories: SMB500 Electrical Box; CB500 Barrier.
Đang cập nhật...
Giỏ hàng của bạn Có 0 sản phẩm
Hãy chọn tỉnh thành của bạn, bạn có thể thay đổi lại ở đầu trang
Số 64-B2 khu đô thị Đại Kim-Định Công,phường Định Công,TP Hà Nội.( có chỗ đỗ xe ô tô)Điện thoại: 024.36 878 666 - 0975 86 85 99
61/7 Bình Giã, phường Tân Bình, Thành phố Hồ Chí MinhĐiện thoại: 028.38 130 866 - 0975 86 85 99
Havietpro.vn - Siêu thị điện máy Văn Phòng