Thông số kỹ thuật

Model DC-9101E
Operating Voltage 24VDC(16VDC~28VDC)
Standby Current ≤60μA
Alarm Current ≤55mA
Fire LED Red, flash in polling and illuminate in alarming
Remote Indication Output Polarized output. Directly connect to remote indicator (built in 10k resistor in series, output current is 2.0mA); Flash in alarming and do not illuminate in normal
Class and Setup Classes A1R, A2S, BS programmable
Maximum Ripple Voltage 2V ( peak-to-peak)
Alarm Reset Instant power down (2s Min, 1.0 VDC Max)
Wiring Two-wire, polarity sensitive. When the polarity is reversed, the detector can give alarm but the remote indicator doesn't work normally
Setting of sensitivity and range The sensitivity can be set by programmer with two level: Level 1 (default), level 2
Detector Class A2R
Action Temperature 62℃
Environment Temperature -10℃~+50℃
Relative Humidity ≤95%, non condensing
Material of Enclosure ABS
Ingress Protection Rating IP2X
Dimension Diameter: 100mm
Height: 54.5mm (With base)
Mouting Hole Spacing 45mm~75mm
Weight About 110g