Standards

IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x, IEEE802.3af/at

LED indicators

16 x Link/Act LEDs
1 x G1 LED
1 x G2/SFP2 LED
1 x PoE-MAX LED
1 x Power LED

Interfaces

16 x 10/100 Mbps Base-TX RJ45 ports (Data/Power)
2 x 10/100/1000 Mbps Base-T RJ45 ports (Data)
1 x 10/100/1000 Mbps Base-X SFP port (Combo)

Lightning protection

Port: 6kV
Power: 6kV

Forwarding mode

Store-and-forward

Switching capability

7.2 Gbps

Packet forwarding rate

5.36 Mpps

Buffer

2.75 Mbit

MAC address table

4K

PoE supply

Ports 1-16 support standard IEEE802.3af/at
30W output per PoE port
130W output of the total PoE Power

Power consumption

150W output the whole device

Input voltage

AC: 100-240V~ 50/60Hz

Dimensions (LxWxH)

294 mm x 178.8 mm x 44 mm

Four Modes

Standard: Default mode of the switch. In this mode, it works as an unmanaged switch; all ports can communicate with each other separately.
Priority: In this mode, port G1 and G2/SFP2 serve as uplink ports, ports 1 – 8 serve as high priority port. All ports can communicate with each other separately.
Extend: In this mode, data rate of ports 9 - 16 reduces to 10 Mbps, the maximum transmission distance can be 250 meters, and all ports can communicate with each other.
VLAN: In this mode, ports 1 - 16 of the switch can communicate with port G1, G2/SFP2 separately, but cannot communicate with each other. You can enable this mode to reduce broadcast storm and isolate DHCP broadcast.

Operating environment

Operating temperature: 0°C - 45℃
Storage temperature: -40°C - 70°C
Operating humidity: (10% - 90%)RH, non-condensing
Storage humidity: (5% - 90%)RH, non-condensing

Certificates

CCC, FCC, CE, RoHS