2.4GHz 300Mbps PoE Outdoor Wireless CPE WITEK WI-CPE211
-Wireless N speed up to 300Mbps.
-500mW High power output, coverage up to 7KM for PTP and PTMP application.
-Built-in 2 x 2 dual-polarized directional MIMO antenna.
-Atheros AR9341 600MHz Chipset, 64MB RAM.
-Bipolar 15dBi antenna.
-Passive PoE Adapter supports up to 100 meter.
Processor |
Atheros AR9341 |
Memory |
64MB SDRAM 8MB Flash |
Interface |
2X10/100BASE-TX |
Ethernet Interface |
|
Power Supply |
24V Passive PoE Adapter |
lncluded |
|
Power Consumption |
8W |
Dimensions |
260 x 100 x 60mm |
Antenna Type |
Built-in 15dBi Dual-polarized Antenna |
Horizontal beam width: 60degree |
|
Vertical beam width: 15degree |
|
Protection |
10KV Lightning Protection |
Enclosure |
Outdoor UV Stabilized Plastic IP65 waterproof Certification |
WIRELESS FEATURES |
|
Wireless Standards |
802.11b/g/n |
Protocol |
CSMA/CA,TCP/IP, IPX/SPX, |
NetBEUI, DHCP |
|
WirelessMode |
AP, WISP, Router, Client |
Wireless Speeds |
11a: 54M, 48M, 36M, 24M,18M,12M,9M,6Mbps |
11n: 6.5M, 13M, 13.5M, 19.5M, 26M, 27M, 39M, 40.5M, 52M, 54M, 58.5M, 65M, 81M, 108M, 121.5M, 135M, 150M, 270M, 300Mbps |
|
Frequency |
2300-2700Hz |
Transmission Power |
27dBm (500mW) |
SOFTWARE FEATURES |
|
Wireless Configurations |
802.11b/g/n Modes |
Selectable Channel Width: 20/40MHz |
|
Automatic Channel Selection |
|
Transmission Power Control |
|
Dynamic Frequency Selection (DFS) |
|
WDS Enable/Disable |
|
Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption |
|
SSID Broadcast Enable/Disable |
|
Distance/ACK Timeout Setting |
|
Wireless MAC Address Filter |
|
Wireless Advanced: |
|
>Beacon Interval/ RTS Threshold/ Fragmentation |
|
>Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia |
|
Management |
WEP management |
Serial |
|
System-level Optimizations |
Optimized IGMP Snooping/Proxy for multicast applications |
Hardware watch dog |
Đang cập nhật...