24-Port 100M PoE + 1-Port SFP 1000M Switch HILOOK NS-0326P-225
- L2, Unmanaged, 24-Port PoE 100M, 1-port RJ45 1000M, 1-port SFP 1000M, 802.3af/at.
- Ports 1 to 24 support IEEE 802.3af/IEEE 802.3at standard.
- When the switch is in Priority mode, it optimizes the cache capability of the ports. Ports 1 - 8 are high-priority ports, and all ports can communicate with each other.
- When the switch is in Standard mode, it is an ordinary switch, and all ports can communicate with each other.
- When the switch is in Isolate mode, all downlink ports of the switch cannot communicate with each other and can only communicate with G1 port and SFP port respectively.
- When the switch is in Extend mode, all ports can communicate with each other. In addition, the transmission rate of the ports 17 – 24 reduces to 10 Mbps.
- The maximum transmission distance is up to 250 meters.
- All ports support 6 kV lightning protection.
- This switch supports Auto MDI/MDIX.
- This switch supports store-and-forward.
- This switch supports MAC address auto learning and auto aging.
- This switch supports smart cache optimization.
- This switch supports rack mounting.
Model |
NS-0326P-225 |
Port |
|
Port amount |
26 |
Port type |
24xRJ45, 10/100 Base-T(X) (Data/Power) |
Standard |
IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3af/at |
Forwarding method |
Store-and-forward |
Flow control |
Back-pressure flow control in IEEE 802.3x full duplex |
Priority queue |
8 |
MAC address table |
4K |
QoS |
Supported on ports 1 and 8 |
Switching capacity |
8.8 Gbps |
Packet forwarding rate |
6.55 Mpps |
Physical appearance/structure |
|
Appearance |
0.6 mm sheet of galvanized metal without electric fan |
Weight |
5.93 kg |
Dimension |
294 mm × 215 mm × 44 mm |
Mounting type |
Rack mounting |
Environment |
|
Operating temperature |
(0 - 40) °C |
Storage temperature |
(-40 - 70) °C |
Operating humidity |
(10 – 90) % RH, non-condensing |
Storage humidity |
(5 – 90) % RH, non-condensing |
Power supply |
|
Power input |
AC: 100-240 V ~ 50/60 Hz |
Reverse connection protection |
Supported |
PoE output power |
225 W |
Power consumption |
< 250 W |
Other parameters |
|
LED indicator |
Link/Act LED indicators, PoE-MAX LED indicator, SFP1 LED |
Đang cập nhật...