Specifications

Physical & Power

- Front panel: Aluminum alloy

- Camera: 2M pixels, automatic lighting

- Buttons: 5

- Light sensor: Support

- Infrared sensor: Support

- Wiegand port: Support

- RS485 port: Support

- RF card reader: 13.56MHz & 125kHz

- Relays out: 2

- Inputs: 2

- Microphone: -40dB

- Speaker: 4Ω / 2W

- Ethernet port: RJ45, 10/100Mbps adaptive

- 802.3af Power-over-Ethernet

- 12V DC connector (if not using PoE)

- Water-proof & Dust-proof: IP65

- Installation: Flush-mounted or Wall-mounted

- Flush-mounted DIM: 226 x 108 x 52 mm

- Wall-mounted DIM: 185 x 85 x 24 mm

- Working Humidity: 10~90%

- Working Temperature: -30°C ~ +65°C

- Storage Temperature: -40°C ~ +70°C

Audio

- SIP v1 (RFC2543), SIP v2 (RFC3261)

- Narrowband audio codec: G.711a, G.711μ, G.729

- Broadband audio codec: G.722

- DTMF: In-band, out-of-band DTMF (RFC2833), SIP Info

- Echo Cancellation

- Voice Activation Detection

- Comfort Noise Generator

Video

- Sensor: 1/2.7 inch CMOS

- Pixels: CIF, QCIF, VGA, 4CIF, 720p, 1080p

- Video codec: H.264, H.265

- Video resolution: up to 1920x1080p

- Max. image transfer rate: 1080p - 25fps

- Viewing angle: 110°(H) / 58°(V)

- High intensity IR LEDs for picture lighting during dark hours with internal light sensor

- Compatible to 3rd-Party-Video components, e.g. NVRs

Door Entry Feature

- Relays controlled individually by DTMF tones

- Camera permanently operational

- Auto-night mode with LED illumination

- White balance: auto

- Minimum illumination: 0.1Lux

Networking & Protocol

- Protocols support: IPv4, HTTP, HTTPS, FTP, SNMP, DNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP, ARP

Deployment & Maintenance

- Auto-Provisioning

- Web management portal

- Web-based packet dump

- Configuration backup / restore

- Entry log export

- Access table export / import

- Firmware upgrade

- System logs (include door access logs)