Đầu dò báo nhiệt địa chỉ gồm đế NOTIFIER FST-851/B501

- Notifier FST-851 Series intelligent plug-in thermal detectors with integral communication has features that surpass conventional detectors. Point ID capability allows each detector’s address to be set with rotary, decimal address switches, providing exact detector locations.

- FST-851 Series thermal detectors use an innovative thermistor sensing circuit to produce 135°F/57°C fixed-temperaturein a low-profile package. 

- These thermal detectors provide effective, intelligent property protection in a variety of applications. FST-851 Series detectors are compatible with Notifier Onyx and CLIP series Fire Alarm Control Panels (FACPs). 

- Sleek, low-profile, stylish design.

- State-of-the-art thermistor technology for fast response.

- Rate-of-rise model (FST-851R/A), 15°F (8.3°C) per minute.

- Factory preset fixed temperature at 135°F (57°C); high-temperature model fixed at 190°F (88°C).

- Addressable by device.

- Compatible with FlashScan® and CLIP protocol systems.

- Rotary, decimal addressing (1-99 on CLIP systems, 1-159 on FlashScan systems).

- Two-wire SLC connection.

- Visible LEDs “blink” every time the unit is addressed.

- 360°-field viewing angle of the visual alarm indicators (two bi-color LEDs). LEDs blink green in Normal condition and turn on steady red in Alarm.

- Integral communications and built-in device-type identification.

- Remote test feature from the panel.

- Built-in functional test switch activated by external magnet.

- Walk test with address display (an address of 121 will blink the detector LED 12-(pause)-1).

- Low standby current.

- Backward-compatible.

- Built-in tamper-resistant feature.

- Designed for direct-surface or electrical-box mounting.

- Sealed against back pressure.

- Plugs into separate base for ease of installation and maintenance. Separate base allows interchange of photoelectric, ionization and thermal sensors.

- SEMS screws for wiring of the separate base.

- Constructed of off-white fire-resistant plastic, designed to commercial standards, and offers an attractive appearance.

- 94-5V plastic flammability rating.

- Remote LED output connection to optional RA100Z(A) remote LED annunciator.

- Optional sounder, relay, and isolator bases.

- Optional flanced surface mounting kit.