Module giám sát SIEMENS FDCI181-2
- 2 monitored digital input.
- Input lines are monitored for open line and short/open circuit (terminal resistors is mandatory).
- Microprocessor-controlled signal evaluation.
- Prevention of noise interference through intelligent analysis of input signals.
- LED display of input status.
- Automatic address setting, without encoder settings or Dip-switch.
- Power supply via FD18-BUS.
- Communication with controller via FD18-BUS(detection line).
- Directly used in dry areas, Applicable in dusty and humid areas when installed in FDCH221 housing.
- “Sticker Method” easy for commissioning.
Thông số kỹ thuật
Model FDCI181-2
Operating voltage 12 … 32 VDC
Operating current (Quiescent) 0.33 mA
Activation current 0.45 mA
Monitoring resistors 3.3KΩ (1/4w)/680Ω (1/4w)
Operating temperature 0 ... +42 °C
Storage temperature -20 ... +75 °C
Humidity ≤95 %
Communication protocol FD18-BUS
Load factors 3
Connection terminals 1.0 ... 1.5 mm2
Color - Housing: white, RAL 9010
- Cover: transparent
Protection category EN60529 / IEC529/ GB4208-93 With housing FDCH221: IP65
Approval (for Russian) TR RF N123-FZ
Đang cập nhật...