|
Model
|
RG-AP630(IDA2)
|
|
Target Deployments
|
For big campus, wireless city, harbour, storage room, mine
|
|
Basic Specifications
|
Radio
|
Concurrent dual-radio dual-band
|
|
Protocol
|
802.11a/b/g/n/ac Wave2
|
|
Antenna
|
Built-in Directional Smart Antenna (support external/internal antenna switching)
|
|
Antenna Loba Orientation
|
Internal Directional: Horizontal 60 degrees, Vertical 30 degrees
|
|
Antenna Gain
|
10dBi
|
|
Max Throughput
|
Build-in antenna model:
800Mbps@2.4G
1733Mbps@5G
2.533Gbps per AP;
External antenna model:
600Mbps@2.4G
1300Mbps@5G
1.9Gbps per AP
|
|
Maximum Transmit Power
|
27dBm
|
|
Adjustable Power
|
1dBm
|
|
IP Rating
|
IP67
|
|
Ports
|
Service Port
|
One 10/100/1000Base-T Port (ETH1/PoE IN); One 10/100/1000Base-T Port (ETH2);
One 1000M SFP Port (Combo Port)
|
|
Management Port
|
1 Console Port (RJ45)
|
|
Power
|
Power Supply
|
PoE+ (802.3at)
|
|
Power Consumption
|
<25W
|
|
WLAN
|
Maximum clients per AP
|
Up to 512
|
|
SSID capacity
|
Up to 16 per radio
Up to 32 per AP
|
|
SSID hiding
|
Support
|
|
Configuring the authentication mode. Encryption mechanism and VLAN attributes for each SSID
|
Support
|
|
Remote Intelligent Perception Technology (RIPT)
|
Support
|
|
X-speed
|
Support
|
|
Intelligent load balancing based on the number of users or traffic
|
Support
|
|
STA control
|
SSID/radio-based
|
|
Bandwidth control
|
STA/SSID/AP-based speed control
|
|
Preference for 5GHz (band select)
|
Support
|
|
Wireless position tracking
|
Support
|
|
Dynamic Frequency Selection (DFS)
|
Future Release Support
|
|
Security
|
PSK, Web, and 802.1x authentication
|
Support
|
|
Data encryption
|
WPA (TKIP) , WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits)
|
|
QR code authentication
|
Support
|
|
SMS authentication
|
Support
|
|
PEAP authentication
|
Support
|
|
Data frame filtering
|
Whitelist, static/dynamic blacklist
|
|
User isolation
|
Support
|
|
Rogue AP detection and countermeasure
|
Support
|
|
Dynamic ACL assignment
|
Support
|
|
WAPI
|
Support
|
|
RADIUS
|
Support
|
|
CPU Protection Policy (CPP)
|
Support
|
|
Network Foundation Protection Policy (NFPP)
|
Support
|
|
Wireless Intrusion Detection System(WIDS)
|
Support
|
|
Wireless Intrusion Prevention System (WIPS)
|
Support
|
|
Routing
|
IPv4 address
|
Static IP address or DHCP reservation
|
|
IPv6 CAPWAP tunnel
|
Support
|
|
ICMPv6
|
Support
|
|
IPv6 address
|
Manual or automatic configuration
|
|
Multicast
|
Support
|
|
Management and Maintenance
|
Network management
|
SNMP v1/v2C/v3, Telnet, SSH, TFTP, and web management
|
|
Visualized wireless heat map analysis
|
Support (need to integrate with SNC)
|
|
Real-time spectrum analysis
|
Support (need to integrate with SNC)
|
|
Fault detection and alarm
|
Support
|
|
Cloud AC management
|
Support
|
|
Statistics and logs
|
Support
|
|
FAT/FIT switching
|
The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC.
The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet.
|
|
External Characteristics
|
Lock
|
Support
|
|
LED Indicators
|
Power status and WDS signal strength
|
|
Relevant Standard
|
Wi-Fi Alliance Certification
|
Support
|
|
Safety Standard
|
GB4943, EN/IEC 60950-1, EN/IEC 60950-22
|
|
EMC Standard
|
GB9254-2008, EN301 489, EN55022
|
|
Health Standard
|
EN 50385
|
|
Radio Standard
|
FCC Part15,EN300328, EN301893
|
|
Vibration Standard
|
GB/T 2423
|
|
Specifications
|
Dimensions (W x D x H)
|
276 × 246 × 90 (mm)
|
|
Weight
|
<2.5kg
|
|
Work Environment
|
Temperature
|
Operating Temperature: -40°C to 65°C (heater module will be enabled at -15°C)
Storage Temperature: -40°C to 85°C
|
|
Humidity
|
Operating Humidity: 0% to 100% (non-condensing)
Storage Humidity: 0% to 100% (non-condensing)
|
|
Installation Mode
|
Wall/pole-mount installation
|
Giờ vàng giá sốc