Power Adapter 48VDC Vivotek NDR-240-48
-Universal AC input/ Full range.
-Built-in active PFC function.
-Protections: Short circuit/ Overload/ Over voltage/ Over temperature.
-Cooling by free air convection.
-Can be installed on DIN rail TS-35/7.5 or 15.
-UL-508 (industrial control equipment) approved.
-EN61000-6-2 (EN50082-2) industrial immunity level.
-100% full load burn-in test.
-NDR-240-48 is one economical slim 240W Din rail power supply series, adapter to be installed on TS-3.5/ 7.5 or TS-35/15 mounting rails. The body is designed 63mm in width, which allowa space saving inside the cabinets. The entire series adopts the full range AC input from 90VAC to 264VAC and conforms to EN61000-3-2, the norm the European Union regulates for harmonic current.
-NDR-240-48 is designed with metal housing that enhances the unit’s power dissipation. With working efficiency up to 90%, the entire series can operate at the ambient temperature between -20ºC and 70ºC under air convection. It is equipped with constant current mode for over-load protection, fitting various inductive or capacitive applications. The complete protection functions and relevant certificates for industrial control apparatus (UL508, TUV EN60950-1, and etc.) make NDR-240 a very competitive power supply solution for industrial applications.
MODEL |
NDR-240-48 |
|
OUTPUT |
DC VOLTAGE |
48V |
RATED CURRENT |
5A |
|
CURRENT RANGE |
0 ~ 5A |
|
RATED POWER |
240W |
|
RIPPLE & NOISE (max.) Note.2 |
150mVp-p |
|
VOLTAGE ADJ. RANGE |
48 ~ 55V |
|
VOLTAGE TOLERANCE Note.3 |
±1.0% |
|
LINE REGULATION |
±0.5% |
|
LOAD REGULATION |
±1.0% |
|
SETUP, RISE TIME |
1500ms, 100ms/ 230VAC 3000ms, 100ms/ 115VAC at full load |
|
HOLD UP TIME (Typ.) |
28ms/230VAC 22ms/115VAC at full load |
|
INPUT |
VOLTAGE RANGE Note.4 |
90 ~ 264VAC, 127 ~ 370VDC |
FREQUENCY RANGE |
47 ~ 63Hz |
|
POWER FACTOR (Typ.) |
PF>0.98/115VAC, PF>0.95/230VAC at full load |
|
EFFICIENCY (Typ.) |
90% |
|
AC CURRENT (Typ.) |
2.5A/115VAC, 1.3A/230VAC |
|
INRUSH CURRENT (Typ.) |
20A/115VAC, 35A/230VAC |
|
LEAKAGE CURRENT |
<1mA / 240VAC |
|
PROTECTION |
OVERLOAD |
105 ~ 130% rated output power. Protection type : Constant current limiting, recovers automatically after fault condition is removed |
OVER VOLTAGE |
56 ~ 65V. Protection type: Shut down o/p voltage, re-power on to recover |
|
OVER TEMPERATURE |
Shut down o/p voltage, recovers automatically after temperature goes down |
|
ENVIRONMENT |
WORKING TEMP. |
-20 ~ +70℃ (Refer to 'Derating Curve') |
WORKING HUMIDITY |
20 ~ 95% RH non-condensing |
|
TEMP. COEFFICIENT |
±0.03%/℃ (0 ~ 50℃) |
|
VIBRATION |
Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 |
|
SAFETY &EMC (Note 4) |
SAFETY STANDARDS |
UL508, TUV EN60950-1 approved |
WITHSTAND VOLTAGE |
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
|
ISOLATION RESISTANCE |
I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25℃/ 70% RH |
|
EMC EMISSION |
Compliance to EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3 |
|
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), EN61204-3, heavy industry level, criteria A |
|
OTHERS |
MTBF |
230.2K hrs min. MIL-HDBK-217F (25℃) |
DIMENSION |
63 x 125.2 x 113.5mm |
|
WEIGHT |
1 kg; 12pcs/ 13kg / 1.1CUFT |
Đang cập nhật...