Power Adapter 54VDC Vivotek HLG-120H-54 giá rẻ nhất thị trường

* Sản phẩm chính hãng,mới 100%.

* Miễn phí giao hàng và bảo hành tại nơi sử dụng trong nội thành Hà Nội, TP HCM. Với các khu vực khác, tùy từng sản phẩm mà chúng tôi có hỗ trợ miễn phí hoặc không.

* Giá bán trên website là giá chưa bao gồm thuế giá trị gia tăng (VAT).

* Thông tin sản phẩm và hình ảnh được cập nhật theo thông tin của nhà sản xuất cung cấp.

Thông tin sản phẩm

Power Adapter 54VDC Vivotek HLG-120H-54

Power Adapter 54VDC Vivotek HLG-120H-54

-Nguồn điện ngõ vào: 90~305VAC.
-Nguồn điện ngõ ra: 54VDC.
-Tần số: 47 ~ 63Hz.
-Công suất tiêu thụ ngõ ra: 120W.
-Nhiệt độ hoạt động: -40℃ ~ 70℃.
-Tiêu chuẩn chống thấm nước và bụi: IP67.
-Unviersal AC input/ Full range (up to 305VAC).
-Built-in active PFC function.
-High efficiency up to 93.5%.
-Protections: Short circuit/ over current/ over voltage/ over temperature.
-Cooling by free air convection.
-OCP point adjustable through output cable or internal potentiomaeter.
-IP67/ IP65 design for indoor or outdoor installations.
-Three in one dimming function (1 ~ 10VDC or PWM signal or resistance).
-Suitable for LED lighting and street lighting applications.
-Compliance to worldwide safety regulations for lighting.
-Suitable for dry/ damp/ wet locations.

Xem thêm nội dung

Thông số kỹ thuật

MODEL	HLG-120H-54
OUTPUT	VOLTAGE	54VDC
	CONSTANT CURRENT REGION Note.4	24 ~ 48V
	RATED CURRENT	2.5A
	RATED POWER	124.2W
	RIPPLE & NOISE (max.) Note.2	200mVp-p
	VOLTAGE ADJ. RANGE Note.6	49 ~ 58V
	CURRENT ADJ. RANGE	1.1 ~ 2.3A
	VOLTAGE TOLERANCE Note.3	± 1.0%
	LINE REGULATION	± 0.5%
	LOAD REGULATION	± 0.5%
	SETUP, RISE TIME Note.8	1200ms, 50ms/115VAC 500ms, 50ms/230VAC at full load; B type 1200ms, 200ms/115VAC 500ms, 200ms/ 230VAC at 95% load
	SETUP, RISE TIME Note.8	HOLD UP TIME (Typ.) 12ms at full load 230VAC/ 115VAC
	HOLD UP TIME (Typ.)	12ms at full load 230VAC / 115VAC
INPUT	VOLTAGE RANGE Note.5	90 ~ 305VAC
	FREQUENCY RANGE	47 ~ 63Hz
	POWER FACTOR (Typ.)	PF>0.98/115VAC, PF>0.95/230VAC, PF>0.93/277VAC at full load (Please refer to 'Power Factor Characteristic' curve)
	TOTAL HARMONIC DISTORTION	THD< 20% when output loading≧ 50% at 115VAC/230VAC input and output loading≧ 75% at 277VAC input
	EFFICIENCY (Typ.)	93.5%
	AC CURRENT (Typ.)	0.55A / 230VAC
	INRUSH CURRENT (Typ.)	COLD START 60A (twidth=375μs measured at 50% Ipeak) at 230VAC
	MAX. No. of PSUs on 16A CIRCUIT BREAKER	5 units (circuit breaker of type B) / 9 units (circuit breaker of type C) at 230VAC
	LEAKAGE CURRENT	<0.75mA / 277VAC
PROTECTION	OVER CURRENT	95 ~ 108%
	Protection type	Constant current limiting, recovers automatically after fault condition is removed
	SHORT CIRCUIT	Constant current limiting, recovers automatically after fault condition is removed
	OVER VOLTAGE	59 ~ 65V
	Protection type	Shut down o/p voltage with auto-recovery or re-power on to recovery
	OVER TEMPERATURE	Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENT	WORKING TEMP.	-40 ~ +70℃ (Refer to 'Derating Curve')
	WORKING HUMIDITY	20 ~ 95% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +80℃ , 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/℃ (0 ~ 50℃ )
	VIBRATION	10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS Note.7	UL8750, CSA C22.2 No. 250.0-08, ENEC, TUV EN61347-1, EN61347-2-13 independent IP65 or IP67, J61347-1,
	SAFETY STANDARDS Note.7	J61347-2-13 approved; design refer to UL60950-1, TUV EN60950-1
	WITHSTAND VOLTAGE	I/P-O/P: 3.75KVAC I/P-FG: 2KVAC O/P-FG: 1.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃ / 70% RH
	EMC EMISSION	Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C (≧ 50% load) ; EN61000-3-3
	EMC IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV), criteria A
OTHERS	MTBF	192.2K hrs min. MIL-HDBK-217F (25℃ )
	DIMENSION	220 x 68 x 38.8mm
	WEIGHT	14.4kg