The Cisco Catalyst 2960-S Series Switches WS-C2960S-24PD-L integrates Power over Ethernet (PoE) and dual-purpose uplinks as its superiority as an easy-to-employed Layer 2 Switch for enterprise, midmarket, and branch office networks. It provides 370W PoE capacity while 30W each to 12 ports or 15.4W each to 24 ports, and it also has 2 Ten Gigabit Ethernet or 2 One Gigabit Ethernet SFP+ uplink ports for dual-purpose. Optional Cisco FlexStack stacking and Lan Base image are both supported.
24 Ethernet 10/100/1000 PoE+ ports
370W PoE capacity
2 10 Gigabit Ethernet or 2 1 Gigabit Ethernet SFP+ uplink ports
Optional Cisco FlexStack stacking support
LAN Base image
WS-C2960S-24PD-L Specifications |
|
General Information |
|
Device Type |
Switch - 24 ports - Managed |
Enclosure Type |
Rack-mountable - 1U |
Ports |
24 x 10/100/1000 + 2 x 10 Gigabit SFP+ |
Power Over Ethernet (PoE) |
Yes |
Performance |
Switching capacity : 176 Gbps |
Forwarding performance (64-byte packet size) : 65.5 Mpps |
|
MAC Address Table Size |
8K entries |
Remote Management Protocol |
SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH |
Encryption Algorithm |
SSL |
Authentication Method |
Secure Shell (SSH), RADIUS, TACACS+ |
Features |
Layer 2 switching, auto-sensing per device, dynamic IP address assignment , power over Ethernet (PoE), auto-negotiation, BOOTP support, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), PoE+, Link Aggregation Control Protocol (LACP), Port Security, MAC Address Notification, Remote Switch Port Analyzer (RSPAN) |
Compliant Standards |
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3at |
RAM |
128 MB |
Flash Memory |
64 MB Flash |
Status Indicators |
Port status, link activity, port transmission speed, port duplex mode, power, system |
Expansion / Connectivity |
|
Interfaces |
24 x 10Base-T/100Base-TX/1000Base-T - RJ-45, PoE |
USB: 1 x 4 PIN USB Type A |
|
1 x console - mini-USB Type B - management |
|
1 x console - RJ-45 - management |
|
1 x 10Base-T/100Base-TX - RJ-45 - management |
|
2 x SFP+ |
|
Expansion Slot(s) |
1 (total) / 1 (free) x Stacking Module |
Rack Mounting Kit |
Optional |
MTBF |
237,016 hour(s) |
Compliant Standards |
TUV GS, CISPR 22 Class A, GOST, BSMI CNS 13438 Class A, CISPR 24, NOM, VCCI Class A ITE, EN55024, CB, EMC, MIC, IEC 60950-1, EN 60950-1, UL 60950-1 Second Edition, RoHS, CSA C22.2 No. 60950-1, FCC Part 15 B Class A |
Environmental Parameters |
|
Min Operating Temperature |
23 °F (-5 °C) |
Max Operating Temperature |
104 °F (40 °C) |
Humidity Range Operating |
10 - 95% (non-condensing) |
Min Storage Temperature |
-13 °F (-25 °C) |
Max Storage Temperature |
158 °F (70 °C) |
Humidity Range Storage |
10 - 95% (non-condensing) |
Power Device |
Power supply - internal |
Voltage Required |
AC 120/230 V ( 50/60 Hz ) |
Power Consumption Operational |
55 Watt |
Dimensions |
17.5 in. (44.5 cm) x 15.2 in. (38.6 cm) x 1.8 in. (4.5 cm) |
Weight |
13 lbs (5.77 kg) |
Đang cập nhật...