|
Model
|
RG-AP840-I
|
|
Hardware specifications
|
|
Radio
|
Dual-radio dual-band（2.4G+5G）：2.4G 2×2 MIMO + 5G 4×4 MIMO
|
|
Protocol
|
Supports standard 802.11ax, dual-radio dual-band, concurrent 802.11ax and 802.11a/b/g/n/ac
|
|
Operating Bands
|
802.11b/g/n: 2.4G ~ 2.483GHz
802.11a/n/ac/ax: 5.150 ~ 5.350GHz, 5.47 ~ 5.725GHz, 5.725 ~ 5.850GHz (vary depending on different countries)
|
|
Spatial Streams
|
Up to 6: 2×2:2 in 2.4GHz, 4×4:4 in 5GHz
|
|
Max Throughput
|
Maximum throughput of 2.4G: 400Mbps
Maximum throughput of 5G: 4.8Gbps
Maximum throughput per AP: 5.2Gbps
|
|
Modulation
|
OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps
DSSS: DBPSK@1Mbps,D QPSK@2Mbps, and CCK@5.5/11Mbps
MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM and 1024QAM
OFDMA (up to 1024-QAM)
|
|
Antenna
|
Integrated antenna design
|
|
Antenna Gain
|
2.4G: 3dBi
5G: 3dBi
|
|
Service Ports
|
3 10/100/1000M Ethernet ports (The LAN1 Port supports PoE in, LAN3 Port supports LAN & IoT module expansion with PoE out)
|
|
Management Port
|
1 console port
|
|
USB
|
1 USB 2.0 port
|
|
IoT Capability
|
BLE
|
|
Reset Button
|
Support
|
|
Anti-theft Lock
|
Support
|
|
LED Indicator
|
1 LED indicator (Supports red, green, blue, orange and flashing mode, which indicates device access. The indicator can be switched off to silent mode.)
|
|
Transmit Power
|
≤100mw (20dBm) (vary depending on different countries)
|
|
Adjustable Power
|
1dBm
|
|
Power Supply
|
Local power supply (DC 48V/1A) (Power adapters are sold separately)
PoE+ (802.3at)
PoE (802.3af) – Not recommended: 5G radio is degraded to 2x2 MIMO, and the PoE out of the LAN3/ IoT port is disabled
|
|
Power Consumption
|
<25.4W
|
|
Physical Specifications
|
|
Temperature
|
Operating Temperature: -10°C to 50°C
|
|
Storage Temperature: -40°C to 70°C
|
|
Humidity
|
Operating Humidity: 5% to 95% (non-condensing)
|
|
Storage Humidity: 5% to 95% (non-condensing)
|
|
Installation Mode
|
Ceiling/wall-mountable
|
|
Dimensions
|
220 × 220 x 48.85 mm (W x D x H)
|
|
Weight
|
1.30kg
|
|
IP Rating
|
IP41
|
|
Software Specifications
|
|
WLAN
|
Maximum clients per AP
|
1024
|
|
BSSID capacity
|
Up to 32
|
|
SSID hiding
|
Support
|
|
5G Priority (Band Steering)
|
Support
|
|
Configuring the authentication mode, encryption mechanism and VLAN attributes for each SSID
|
Support
|
|
Remote Intelligent Perception Technology (RIPT)
|
Support
|
|
Intelligent device recognition technology
|
Support
|
|
Intelligent load balancing based on the number of users or traffic
|
Support
|
|
STA control
|
SSID/radio-based
|
|
Bandwidth control
|
STA/SSID/AP-based bandwidth control
|
|
Data encryption
|
WPA (TKIP), WPA-PSK, WPA2 (AES), WPA3, WEP (64/128 bits)
|
|
PSK and web authentication
|
Support
|
|
PPSK authentication (For Employee)
|
Support (require wireless controller)
|
|
802.1x authentication
|
Support
|
|
PEAP authentication
|
Support
|
|
Data frame filtering
|
Whitelist, static/dynamic blacklist
|
|
User isolation
|
Support
|
|
Rogue AP detection and countermeasure
|
Support
|
|
Dynamic ACL assignment
|
Support
|
|
RADIUS
|
Support
|
|
CPU Protection Policy (CPP)
|
Support
|
|
Network Foundation Protection Policy (NFPP)
|
Support
|
|
IP
|
IPv4 and IPv6 address
|
Support
|
|
Multicast routing
|
Multicast to unicast conversion
|
|
DHCP service
|
DHCP Snooping, Option 82, Server, Client
|
|
Management and Maintenance
|
Supported wireless LAN controllers
|
Ruijie WS Series Wireless Controller
Ruijie MACC-Base Software Controller
Ruijie Cloud (Public Cloud)
|
|
Management protocol
|
Telnet, SSH, TFTP, Web
|
|
Wireless Intelligent AI Optimization Service (WIS)
|
Support
|
|
SNMP
|
SNMPV1,V2c,V3
|
|
Syslog / Debug
|
Support
|
|
FAT/FIT/MACC mode switching
|
Factory default firmware supports FAT (standalone) or FIT mode (WS controller) or MACC mode (Ruijie MACC-Base or Ruijie Cloud) management
|
Giờ vàng giá sốc