RG-SNC WLAN Component

Topology Management

Support viewing of all wired and wireless devices on one single topology.

Surveillance Statistics

Support accessibility and alert statistics for all wireless ACs and APs.

Support user trend statistics for the whole network, hotspots, single AC and APs. Support online user statistics for hotspots, single AC and APs.

Support logout rate statistics for the whole network, hotspots and single AP. Support setting a time range for logout rate statistics. Support viewing of Top N logout rate statistics.

Support idle AP statistics for the whole network. Support viewing of Top N idle APs on a daily or monthly basis.

Support uplink and downlink rate statistics/Top N viewing for all hotspots and APs. Support trend statistics for single hotspot, AP uplink and downlink rates.

Support surveillance indicator customization.

Device Management

Support viewing of the following information in AP: wireless radio table, device information, originating AC and hotspot, SSID, alert statistics, etc.

Support statistics of AP online user trend, bandwidth utilization trend, CPU/memory utilization trend and STA association failure causes.

Support radio on/off setting of AP.

Support manually adding, deleting and auto discovery of AC.

Support connecting AC to Web network control and Telnet management.

Support viewing of the following information in AC: device panel, device information, device status, management AP, SSID and alert statistics.

Support AC statistics on current user trend, bandwidth utilization trend and CPU/memory performance trend.

Wireless User Management

Support viewing of wireless user MAC, IP, online status, online duration, uplink/downlink rates, signal strength and device type.

Support viewing of user online/offline records including time of occurrence, action, user IP, WLAN ID, SSID, associated AP, originating AC, etc.

Support real-time surveillance on designated devices for uplink/downlink traffic trend and signal strength. Data update frequency <=5s.

Support designating several terminals as key end devices with operation quality surveillance. Issue alerts when packet retransmission rate exceeds the designated threshold.

Issue alerts when abnormal behavior is found in the key end devices. Such events include offline, association/online failure, etc.

Support viewing of end device statistical graphs of designated user group (hotspot). Minimum requirement: present the graphs in terms of band (2.4G, 5G), connection protocols (802.11a/ 802.11b/ 802.11g/ 802.11n/802.11ac/802.11ax).

Spectrum Analysis

Support >=8 spectrum analysis: current interference table, spectrum diagram, real-time FFT diagram, FFT occupation ratio diagram, spectrum density diagram, channel occupation ratio diagram, channel occupation ratio trend diagram and power trend diagram.

Device Configuration Management

Support configuration of AC system attribute, WLAN, security, interface, trap/syslog servers, etc.

Support synchronization of AC blacklist.

Wireless Tracking

Support tracking of end device, authentication user, AP, AC, rogue AP based on IP, MAC, login user name, real user name, device name, SSID, AP location or hotspot name.

Rogue AP Management

Support rogue AP table including rogue AP BSSID, SSID, channel, signal strength, vendor, finder AP and its location, single AP mode, countermeasure status, etc.

Support AP operating mode and rogue AP countermeasure status statistics.

Support graphical configuration of AP operating mode (graphical guidelines for AP operating mode configuration).

Support setting of blacklist and whitelist.

Hotspot Heat Map Management

Support import, export and manual editing of hotspot information.

Support existing APs management based on hotspots. Support statistics of SSID associated with hotspot, logout rate, associated user count and uplink/downlink rates.

Support floor plan import in .jpg, .png or .gif format. Support setting AP location on the floor plan and viewing of AP coordinates.

Support setting different kinds of obstacles. Support setting AP height and deployment scenario.

Support viewing of AP information, AP user information on heat map and adjusting AP channel.

Support heat map generation based on signal strength, rate, channel conflict (2.4G/5GHz).

Alert Management

The product should be built-in with a variety of wireless alert categories. Support alert category customization based on the actual demand whenever necessary. Provide a minimum of 10 common syslog alert customization lists.

The product should be built-in with a variety of wireless alert categories. Support alert category customization based on the actual demand whenever necessary. Provide a minimum of 15 pre-defined trap alert customization lists.

Hierarchical Management

Support AC, hotspot and SSID management based on hierarchy and categorization.

Report Management

Customize task for long-term surveillance of the network performance. Support report generation on a real-time or periodic basis.

Support report creation, search, editing and deletion. Support report online viewing, import/export, etc. Support periodic export and regular publishing.

Support history report search.

Support report data filtering based on AC, hotspot or SSID.

Integration of Topology and User Information

To protect customer's early investment, support registration integration with SAM/SMP. Support searching of online user table including user name, IP address, MAC address, etc.

Compatibility

The product should support standard SNMP MIP management base. Support management on mainstream vendor standard MIB device.

Certification

The product should be compliant with the related rules under Administration of Software Products Regulation.
With national software copyright registration certificate.