Model

RG-AP130(L)

Radio

Concurrent dual-band dual-radio

Protocol

802.11a/b/g/n/ac

Antenna

Built-in omnidirectional antenna (Base gain 3.5dBi)
2×2 MIMO

Spatial Streams

2

Max Throughput

300Mbps@2.4GHz
867Mbps@5GHz
1.167Gbps per AP

Maximum Transmit Power

≤100mW (20dBm, transmit power of the RF card only)

Service Ports

Front: 4 10/100M Ethernet ports
Side: 1 RJ-45 Voice/PoE pass-through port (RJ-11 combo)
Rear: 1 10/100/1000M uplink port; 1 RJ-45 Voice/PoE pass-through port (RJ-11 combo)

Management Port

1 console port (Micro USB)

Lock

Standard: Anti-theft screws and ordinary screws
Optional: Lock and key

Color Plate Cover Options

White, black, silver and gold

LED Indicator

1 LED status indicator (hidden) (configurable to switch off)

IP Rating

IP41

WLAN

Maximum clients per AP

Up to 32

BSSID Capacity

Up to 8 per radio
Up to 16 per AP

SSID hiding

Support

Configuring the authentication mode, encryption mechanism, and VLAN attributes for each SSID

Support

Remote Intelligent Perception Technology  (RIPT)

Support

Intelligent identification of smart device

Support

Intelligent load balancing based on the number of users or traffic

Support

STA control

SSID/radio-based

Bandwidth control

STA/SSID/AP-based speed control

Preference for 5 GHz (band select)

Support

802.11w

Support

Dynamic Frequency Selection (DFS)

Support

Security

PSK, Web, and 802.1x authentication

Support

Data encryption

WPA (TKIP), WPA2 (AES) , WPA-PSK, and WEP (64 or 128 bits)

QR code authentication

Support

SMS authentication

Support

PEAP authentication

Support

Data frame filtering

Whitelist, static/dynamic blacklist

User isolation

Support

Rogue AP detection and countermeasure

Support

Dynamic ACL assignment

Support

RADIUS

Support

CPU Protection Policy (CPP)

Support

Network Foundation Protection Policy (NFPP)

Support

Wireless Intrusion Detection System (WIDS)

Support

Wireless Intrusion Prevention System (WIPS)

Support

Remote probe

Future release support

L2 Features

IGMP snooping

Support

VLAN features

Support

Routing

IPv4 address

Static IP address or DHCP reservation

IPv6 transparent transmission

Support

Multicast

Multicast to unicast conversion

Location-based Service

Wireless position tracking

Support

Management and Maintenance

Network management

SNMP v1/v2C/v3, Telnet, TFTP, FTP and Web management

Visualized wireless heat map analysis

Support

Real-time spectrum analysis

Support

Fault detection and alarm

Support

Statistics and logs

Support

FAT/FIT switching

The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC.
The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet.

Dimensions (W x D x H)

116 × 86 × 42 mm

Weight

0.23kg

Installation Mode

Standard 86-type faceplate installation

Power Supply

PoE (802.3af)

Power Consumption

<8W