Model

RG-AP740-I

Target Deployments

For campuses, offices, hospitals, and hotspots of service providers

Basic Specifications

Radio

Concurrent tri-radio dual-band

Protocol

802.11a/b/g/n/ac
Wave 2

Operating Bands

802.11b/g/n: 2.4GHz to 2.483GHz
802.11a/n/ac: 5.150GHz to 5.350GHz, 5.47GHz to 5.725GHz, 5.725GHz to 5.850GHz (vary depending on countries)

Antenna

Built-in 'X-Sense 4' Smart Antenna
4×4 MU-MIMO     

Max Throughput

1733Mbps/800Mbps/433Mbps per radio
2966Mbps per AP

Spatial Streams

4

Modulation

OFDM: BPSK@6/9Mbps
QPSK@12/18Mbps
16-QAM@24Mbps
64-QAM@48/54Mbps
DSSS
DBPSK@1Mbps
DQPSK@2Mbps
CCK@5.5/11Mbps
MIMO-OFDM
PSK, QPSK, 16QAM, 64QAM and 256QAM

Receiver Sensitivity

11b: -91dBm (1Mbps), -88dBm (5Mbps), -85dBm (11Mbps)
11a/g: -89dBm(6Mbps), -80dBm(24Mbps)，-76dBm(36Mbps), -71dBm(54Mbps
11n: -83dBm@MCS0, -65dBm@MCS7, -83dBm@MCS8, -65dBm@MCS15
11ac HT20: -83dBm (MCS0), -57dBm (MCS9)
11ac HT40: -79dBm (MCS0), -57dBm (MCS9)
11ac HT80: -76dBm (MCS0), -51dBm (MCS9)

Maximum Transmit Power

100mw

Adjustable Power

1dBm

IP Rating

IP41

Ports

Service Port

2 10/100/1000BASE-T Ethernet uplink ports (Both ports support PoE) 1 USB port

Management Port

1 console port

Power

Power Supply

Local power supply (DC 48V) and PoE+ (802.3af/802.3at)
Support dual PoE for power backup
(Power adapters sold separately)

Power Consumption

<25.4W

WLAN

Maximum clients per AP

Up to 612

BSSID capacity

Up to 16 per radio/Up to 48 per AP

SSID hiding

Support

Configuring the authentication mode, encryption mechanism and VLAN attributes for each SSID

Support

Remote Intelligent Perception Technology (RIPT)

Support

X-speed

Support

Intelligent load balancing based on the number of users or traffic

Support

STA control

SSID/radio-based

Bandwidth control

STA/SSID/AP-based speed control

Preference for 5GHz (band select)

Support

Wireless position tracking

Support

Dynamic Frequency Selection(DFS)

Future Release Support

Security

PSK, Web, and 802.1x authentication

Support

Data encryption

WPA (TKIP), WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits)

SMS authentication

Support

PEAP authentication

Support

Data frame filtering

Whitelist, static/dynamic blacklist

User isolation

Support

Rogue AP detection and countermeasure

Support

Dynamic ACL assignment

Support

RADIUS

Support

Wireless Intrusion Detection System (WIDS)

Support

Wireless Intrusion Prevention System (WIPS)

Support

Bluetooth

iBeacon: Support

Routing

IPv4 address

Static IP address or DHCP reservation

IPv6 CAPWAP tunnel

Support

ICMPv6

Support

IPv6 address

Manual or automatic configuration

Multicast

Multicast to unicast conversion

Management and Maintenance

Network management

SNMP v1/v2C/v3, Telnet, TFTP, Web management

One-click Optimization

Support (need to integrate with WIS)

Fault detection and alarm

Support

Cloud AC management

Support

Statistics and logs

Support

FAT/FIT switching

The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC.
The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet.

External Characteristics

Lock

Support

LED Indicators

1 LED (red, green, blue, orange, and flashing modes, breathing flashing mode for smart device access, and the indicator can be switched off to silent mode)

Specifications

Dimensions (W x D x H)

230 × 230 × 42 mm (Height of AP only, excluding case and mount kit)

Weight

1.3kg