Model

Vigor AP912C

Physical Interfaces/Controls

- 1 x Gigabit Ethernet LAN Port, RJ45 (accepts PoE Power)
- Factory Reset Button (recessed)
- DC Power Socket
- 1 x Security Lock

Wireless Performance

- AC1200 Class Wireless Access Point
- 5GHz: PHY Rate 866Mb/s
- 2.4GHz: PHY Rate 300Mb/s

Wireless LAN Compatibility

- IEEE 802.11ac (Wave 1 & 2)/a/b/g/n
- Frequency Band 2.4 GHz & 5.8Ghz – Simultaneous Operation
- Up to 128 clients per radio

2.4GHz Wireless LAN Features

- 802.11b, 802.11g, 802.11n
- 20 MHz/40 MHz
-  Up to 300Mb/s total Wi-Fi throughput (PHY Rate): 802.11b/g/n: 300Mb/s PHY rate (150Mb/s per Spatial Stream)

5Ghz Wireless LAN Features

- 802.11ac (Wave 1 & 2)/ 802.11n/ 802.11a
- 20 /40 /80 MHz
- Extended 5Ghz Band - Channels 36-48, 52-64, 100-140
- DFS/TPC Support
- Multi-User MIMO
- Up to 866Mb/s total Wi-Fi throughput (PHY Rate):
   + 802.11a/n: 300Mb/s PHY rate (150Mb/s per Spatial Stream)
   + 802.11ac: 866Mb/s PHY rate (433Mb/s per Spatial Stream)

Security Features

- Wireless Encryption: WPA2/WPA3- also supports WPA/WEP (Not recommended)
- Built in 802.1x server (PEAP/EAP-TLS)
- 802.1x RADIUS Proxy (PEAP/EAP-TLS)
- PMK Caching & Pre-authentication
- Wireless Client Isolation
- Control Isolation of 2.4GHz and 5GHz bands
- Hidden SSIDs (Selectable)
- WPS - WiFi Protected Setup
- MAC Address Filtering (ACL) - Up to 256 entries
- Mobile Device Management
- EAPOL Key Retry - Disable EAPOL Key Retry to protect unpatched WLAN clients from KRACK

Wireless Control Features

- Wireless Client Status List in WUI
- Client Limit per radio
- Client Limit per SSID
- Up to four distinct SSIDs (for VLANs) for each frequency band
(2.4/5Ghz)
- MAC Cloning
- Built-in DHCP Server & DHCP Relay
- Trusted DHCP Server IP for WLAN - Only specifed DHCP server IP can assign IP addresses to WLAN clients
- 802.1q VLAN
- Station Control - Time limit wireless connectivity per Station (e.g.1 hour) & set allowed Reconnection time (e.g. 1 day)
- Device Object/Group Control - Schedule Internet access for individual devices or groups
- Airtime Fairness
- Band Steering
- AP-Assisted Client Mobility
- WMM (Wireless MultiMedia)
- Bandwidth Management (Per Station/ Per SSID)

Diagnostic Features

- System Log
- Speed Test
- Traffic Graph
- Wireless LAN Statistics
- Interference Monitor - Built-in Site Surveyor
- Web Interface (HTTP/HTTPS)
- DHCP Client
- TR-069 Control (For VigorACS or other TR-069 platform)
- CLI (Command Line Interface) - Telnet
- Firmware upgrade by TR-069/HTTP
- Central AP Management (from compatible DrayTek router/ controller)
- SNMP v2, v2c, v3
- Management VLAN
- Configuration File Export (with password) & Import
- Wireless Auto On/Off  - Disable Wireless if VigorAP is unable to ping specified host

Power Requirements

- Maximum Power Consumption: 10 Watt
- DC 12V via external 100-240v AC/DC PSU
- 802.3af PoE via LAN port. Requires PoE injector or a PoE switch
such as the VigorSwitch P2121 

Environmental & Physical

- Operating Temperature: 0 ° C to 45 ° C
- Operating Humidity: 10% to 90% (Non-condensing)
- Physical Dimensions: 162mm (wide/diameter) x 42mm (high)
- Weight: 0.3kg
- Ceiling or Wall Mountable (requires rear cable entry)
- Pack Contents: VigorAP 912C wireless access point, Ceiling Mount Bracket, T-Rail Bracket & Screws, Quick Start Guide, Ethernet Cable