Input Connectors

XLR and 1/4" TRS (Pin 2 and tip hot)

Input Type

Electronically balanced/unbalanced, RF filtered

Input Impedance

Balanced > 40 kOhm, unbalanced >20 kOhm

Max Input

> +22 dBu balanced or unbalanced

CMRR

Typically >50 dB at 1 kHz

Output Connectors

XLR and 1/4" TRS (Pin 2 and tip hot)

Output Type

Servo-balanced/unbalanced, RF filtered

Output Impedance

Balanced 30 Ohm, unbalanced 15 Ohm

Max Output

> +22 dBm balanced, > +20 dBm unbalanced

Bandwidth

20 Hz to 20 kHz, +0/-0.5 dB

Frequency Response

0.35 Hz to 90kHz, +0/-3 dB

Noise

< -96 dBu, unweighted, 22 kHz measurement bandwidth

Dynamic Range

> 118 dB, unweighted

THD+Noise

>0.008% typical at +4 dBu (1 kHz unity gain), 0.08% typical at +20 dBu (1 kHz unity gain), < 0.1% any amount of compression up to 40 dB, 1 kHz

IMD

< 0.1% SMPTE

Interchannel Crosstalk

< -80 dB 20Hz to 20 kHz

Stereo Coupling

True RMS Power Summing

Compressor Threshold Range

-40 dBu to +20 dBu

Compressor Ratio

1:1 to infinity:1

Compressor Threshold Characteristic

Selectable OverEasy® or hard knee

Compressor Attack/Release Characteristic

AutoDynamic™

Compressor Attack Time

Program-dependent

Compressor Release Time

Program-dependent

Compressor Output Gain

-20 to +20 dB

Limiter Threshold Range

0 dBu to +24 dBu (off)

Limiter Ratio

infinity:1

Limiter Type

PeakStopPlus® two-stage limiter

Limiter Stage 1

PeakStop® brickwall limiter

Limiter Stage 1 Attack Time

Zero

Limiter Stage 1 Release Time

Zero

Limiter Stage 2

Predictive intelligent program limiter

Limiter Stage 2 Attack Time

Program-dependent

Limiter Stage 2 Release Time

Program-dependent

OverEasy® Switch

Activates the OverEasy compression function

I/O Meter Switch

Switches between monitoring input and output levels on the Input/Output Level meter

Bypass Switch

Activates the direct input-to-output hard-wire bypass

Operating Level Switch

(rear panel) Switches the nominal operating level between -10 dBV and +4 dBu simultaneously for both input and output levels

ST Link Switch

Links channels in stereo pairs. Channels One and Three become the master channels

Gain Reduction Meter

8 segment LED bar graph at 1, 3, 6, 10, 15, 20, 25, and 30 dB

I/O Meter

8-segment LED bar graph at -24, -18, -12, -6, 0, +6, +12, and +18 dBu

PeakStop™ Indicator

1 LED to indicate PeakStop™ limiting

Function Switches

LED indicator for each front-panel switch

Output Transformer Options

Jensen® JT-123-dbx or JT- 11-dbx, BCI RE- 123-dbx or RE-11-dbx

Operating Voltage

Switchable:100-120 VAC 50-60 Hz or 200-240 VAC 50/60 Hz

Power Consumption

20 Watts

Fuse

100-120 VAC:250 mA Slow Blow, 200-240 VAC:125 mA Type T

Power Connector

IEC receptacle

Dimensions

1.75"Hx19"Wx9"D (4.4cmx48.3cmx20.1cm)

Unit Weight

5.2 lbs. (2.4 kg)

Shipping Weight

7.6 lbs. (3.5 kg)