Model

RG-AP630(IDA2)

Target Deployments

For big campus, wireless city, harbour, storage room, mine

Basic Specifications

Radio

Concurrent dual-radio dual-band

Protocol

802.11a/b/g/n/ac Wave2

Antenna

Built-in Directional Smart Antenna (support external/internal antenna switching)             

Antenna Loba Orientation

Internal Directional: Horizontal 60 degrees, Vertical 30 degrees

Antenna Gain

10dBi

Max Throughput

Build-in antenna model:
800Mbps@2.4G
1733Mbps@5G
2.533Gbps per AP;
External antenna model:
600Mbps@2.4G
1300Mbps@5G
1.9Gbps per AP

Maximum Transmit Power

27dBm

Adjustable Power

1dBm

IP Rating

IP67

Ports

Service Port

One 10/100/1000Base-T Port (ETH1/PoE IN); One 10/100/1000Base-T Port (ETH2);
One 1000M SFP Port (Combo Port)

Management Port

1 Console Port (RJ45)

Power

Power Supply

PoE+ (802.3at)

Power Consumption

<25W

WLAN

Maximum clients per AP

Up to 512

SSID capacity

Up to 16 per radio
Up to 32 per AP

SSID hiding

Support

Configuring the authentication mode. Encryption mechanism and VLAN attributes for each SSID

Support

Remote Intelligent Perception Technology (RIPT)

Support

X-speed

Support

Intelligent  load balancing based on the number of users or traffic

Support

STA control

SSID/radio-based

Bandwidth control

STA/SSID/AP-based speed control

Preference for 5GHz (band select)

Support

Wireless position tracking

Support

Dynamic Frequency Selection (DFS)

Future Release Support

Security

PSK, Web, and 802.1x authentication

Support

Data encryption

WPA (TKIP) , WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits)

QR code authentication

Support

SMS authentication

Support

PEAP authentication

Support

Data frame filtering

Whitelist, static/dynamic blacklist

User isolation

Support

Rogue AP detection and countermeasure

Support

Dynamic ACL assignment

Support

WAPI

Support

RADIUS

Support

CPU Protection Policy (CPP)

Support

Network Foundation Protection Policy (NFPP)

Support

Wireless Intrusion Detection System(WIDS)

Support

Wireless Intrusion Prevention System (WIPS)

Support

Routing

IPv4 address

Static IP address or DHCP reservation

IPv6 CAPWAP tunnel

Support

ICMPv6

Support

IPv6 address

Manual or automatic configuration

Multicast

Support

Management and Maintenance

Network management

SNMP v1/v2C/v3, Telnet, SSH, TFTP, and web management

Visualized wireless heat map analysis

Support (need to integrate with SNC)

Real-time spectrum analysis

Support (need to integrate with SNC)

Fault detection and alarm

Support

Cloud AC management

Support

Statistics and logs

Support

FAT/FIT switching

The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC.
The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet.

External Characteristics

Lock

Support

LED Indicators

Power status and WDS signal strength

Relevant Standard

Wi-Fi Alliance Certification

Support

Safety Standard

GB4943, EN/IEC 60950-1, EN/IEC 60950-22

EMC Standard

GB9254-2008, EN301 489, EN55022

Health Standard

EN 50385

Radio Standard

FCC Part15,EN300328, EN301893

Vibration Standard

GB/T 2423

Specifications

Dimensions (W x D x H) 

276 × 246 × 90 (mm)

Weight

<2.5kg

Work Environment

Temperature

Operating Temperature: -40°C to 65°C (heater module will be enabled at -15°C)
Storage Temperature: -40°C to 85°C

Humidity

Operating Humidity: 0% to 100% (non-condensing)
Storage Humidity: 0% to 100% (non-condensing)

Installation Mode

Wall/pole-mount installation